• Название:

    Установка AUX входа на BMW X 3 e 83

  • Размер: 0.27 Мб
  • Формат: PDF
  • или
  • Название: NewSI Bulletin Layout
  • Автор: acklerje

Installation Instructions

Page 1 of 10

Universal Accessories, Auxiliary Input

Accessory
Development

January 2004

SUBJECT

Auxiliary Audio Input Kit - P/N 82 11 0 149 390
MODEL
5-Series (E39):

Vehicle Production 9/2002 – On

with In-dash CD and without Navigation

X5 (E53) with In-dash CD:

Vehicle Production 10/2002 – On

with In-dash CD and without Navigation

X3 (E83)

All Vehicle Production

with Navigation or without Navigation

SUGGESTED INSTALLATION TIME:

0.5 Hours

These instructions were developed especially for BMW vehicles and are not to be compared to any
existing instructions for vehicles other than BMW. No methods other than those specified in this
document are to be used to install this Auxiliary Audio Input adapter in BMW vehicles.

PARTS INFORMATION
Contents of Kit – P/N 82 11 0 149 390
Description
AUX input cable
Faceplate
Mounting Screws
Cable ties (3mm x 104mm)

QTY
1
1
2
3

BMW Part Number
N/A
N/A
65 12 6 919 475
N/A

5-Series installation begins page 2
X5 installation begins page 5
X3 installation begins page 8

 DO IT RIGHT THE FIRST TIME, ON TIME, EVERY TIME 
Installation Manual P/N 01 29 0 309 669
© 2004 BMW of North America, LLC

8
X3
1. Remove radio from center console per TIS.
2. Remove glovebox assembly per TIS.
3. On left side of glovebox locate and mark
center point (1).
A = 25 mm
B = 15 mm

4. Using Auxiliary Input faceplate (1) as a
template, line up center hole of faceplate
against upper marked location (2). Mark
center-point of 2 outer holes.

5. Drill three 2mm holes in locations (1) & (2).
6. Expand center hole (1) with a 10mm drill bit.

7. Mount Auxiliary Input faceplate (1) to interior
of glovebox housing using provided screws
(2) as indicated.

Installation Manual P/N 01 29 0 309 669

9
X3
8. Locate main radio harness (1) in center
console.
9. Determine if vehicle already has black 12-pin
connector in harness (2).
If Radio does not have Black 12-pin
connector in this location (2), continue to
Step 10.
If Radio has black 12-pin connector in this
location (2), proceed to Step 12.
Illustration: X5 shown, X3 Similar

On vehicles without black 12-pin connector in
radio harness connector
10. Insert Auxiliary input connector into main
radio harness (1).
11. Feed Auxiliary Input Cable into center
console.
Proceed to Step 16.
Illustration: X5 shown, X3 similar

On vehicles with black 12-pin connector already
in radio harness connector:
12. Remove Black housing (1) from Auxiliary
Input Connector (2). Remove 3 terminals (3)
from connector (2) by pushing in metal tangs
on terminals with pin removal tool and pulling
terminals out of connector.
Note: Take care not to damage these
terminals since they will be reused.
13. Remove Black 12-pin connector from radio
harness and remove black housing.
14. Insert 3 terminals (1) of Auxiliary adapter
cable into existing 12-pin connector (2) in
shown locations.
White/Red - Slot 3
White/Blue - Slot 4
White/Brown - Slot 10
15. Re-install black housing onto 12-pin
connector, then re-insert into radio harness.

Installation Manual P/N 01 29 0 309 669

10
X3
16. Route Auxiliary Input Cable (2) from radio
harness (1) down through position indicated
by black arrow.

Illustration: X5 shown, X3 similar

17. Insert Audio Jack (1) into faceplate (2) and
secure with provided nut (3).

18. Re-install glovebox assembly, removing slack
from cable by pulling excess through radio
mounting cavity. Secure excess cable in this
location.
Caution: Please ensure that there is enough
slack in Aux Input cable for safe removal of
radio.
19. Re-install radio and all components removed
during installation.
20. Installation is complete. Test operation of
system. Turn radio ON. Press “MODE” (1)
button on radio until AUX mode is displayed.
Illustration: Z4 shown, X3 similar

Installation Manual P/N 01 29 0 309 669